What is Orifice Plate?
An orifice plate is a type of flow measurement device used primarily in differential pressure flowmeters to measure the flow rate of fluids. This simple yet effective device consists of a flat plate with a precisely sized hole (orifice) cut into it, which creates a flow restriction in a pipe. As fluid flows through the pipe and encounters the orifice plate, it accelerates through the opening, causing a drop in pressure that can be measured to determine the flow rate.
How Orifice Plates Work
Flow Restriction: When a fluid flows through a pipe equipped with an orifice plate, the fluid velocity increases as it passes through the smaller area of the orifice. According to the Bernoulli principle, this increase in velocity leads to a decrease in pressure at the orifice.
Differential Pressure Measurement: Pressure taps are placed before and after the orifice plate to measure the pressure at both points. The pressure difference (or differential pressure) is directly related to the flow rate. This relationship is mathematically described by the orifice equation, which calculates flow rate based on the orifice size, fluid density, and the differential pressure.
By utilizing the principles of differential pressure measurement, they provide accurate flow data across various applications in industries such as oil and gas, water treatment, chemical processing, and power generation. Their widespread use and proven effectiveness make orifice plates a staple in modern flow measurement technology.
Featured Company
EESIFLO TECHNOLOGIES INC.
Phone: + 1 318 614 3971
Address:
– 3928 Highway 80 Rayville Louisiana, 71269,
– 4600 FM-307 Midland TX 79706 United States
FEATURED PRODUCTS
X52E Orifice Plate Assembly
The Cla-Val Model X52E Orifice Plate Assembly is typically used with Cla-Val flow control valves. The orifice plate is an essential component used to generate
Orifice plate Model : F100
Orifice plates are widely used for flow measurement as they provide the simplest and the most economical means of flow detection. Orifice plates are available
BLS100 Orifice plate
The orifice plates type BLS are manufactured for installation between flanges according to standard DIN EN ISO 5167 part 2. But measuring sections with orifice
Orifice plate Models FLC-OP
Differential pressure flow meters are used in many industrial applications. As primary flow elements, orifice plates represent the most common solution. This instrument is notable
Rubber Fab Tri-Clamp® Orifice Plate Gaskets
PTFE Sanitary Tri-Clamp® Gaskets are the material of choice where low temperature flexibility and hygienic seal memory are not required.
Brass Orifice Plates
Our range of Brass Orifice Plates is available in brass of 3mm, 6mm or even 10mm thickness and designed for nominal bores from 50-200mm.
Flowstream Orifice Plates
The Orifice plate is the most commonly used differential pressure device offering economical, simple and sufficient accuracy for many applications within the industry. Calibration and
NUFLO ORIFICE FLANGE UNIONS
An orifice plate is one of the most popular primary devices for measuring gases and low-viscosity liquids. The NuFlo Orifice Flange Union helps ensure accurate