The Deltatop DO65F is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is a meter run with standard orifice in compact or remote version and included accessories.
{loadposition fd-01header}
Differential pressure flow Deltatop DO65F
Overview
The Deltatop DO65F is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is a meter run with standard orifice in compact or remote version and included accessories.
Differential pressure flow Deltatop DO65F Features
| Measuring Principle | Delta P | |
| Product headline | Calculated volume or mass flow measurement. dp primary element (orifice). Orifice meter run with annular chamber corner taps. |
|
| Sensor features | Internationally standardized. Including pipe section. Small pipe sizes DN10…50 ; 3/8…2″. Exchangeable orifice plate. Compact or remote design. Optimizable for minimized pressure loss, improved uncertainty or maximized Turndown. Deltabar S/M differential pressure transmitter. |
|
| Nominal diameter range | DN 10…50 3/8″ … 2″ |
|
| Max. measured error | typically 1,5% of calculated volume or mass. DN 25 / 1″ calibration recommended. Uncertainty of primary element excluding uncertainty of density or compensation. |
|
| Measuring range | 0.4 … 550m3/h | |
| Max. process pressure | PN6 … 160 Cl.150 … 2500 |
|
| Medium temperature range | Compact version: -200°C … 200°C -328°F … 392°F Remote version: |
|
| Degree of protection | Transmitter (Deltabar): IP67 NEMA6P |
|
| Display/Operation | Transmitter (Deltabar): 4-line display 3 push buttons Quick setup HistoROM |
|
| Outputs | Transmitter (Deltabar): 4 … 20 mA |
|
| Digital communication | Transmitter (Deltabar): HART PROFIBUS PA FOUNDATION Fieldbus |
|
| Hazardous area approvals | Transmitter (Deltabar): ATEX FM CSA IEC TIIS NEPSI |
|
