WindMaster 3D Sonic Anemometer
The WindMaster 3D sonic anemometer will monitor wind speeds of 0-50m/s (0-100mph), providing digital outputs for U, V, and W vectors. Outputs for Speed of Sound and Sonic Temperature are available as standard.
The WindMaster 3D sonic anemometer will monitor wind speeds of 0-50m/s (0-100mph), providing digital outputs for U, V, and W vectors. Outputs for Speed of Sound and Sonic Temperature are available as standard.
The 2D Ultrasonic Anemometer detects the horizontal component of the wind speed and wind direction. With no moving parts the anemometer is free from wear and maintenance and needs no calibration. The sensor arms are automatically heated if necessary ensuring continued operation in snow and during icing events. The electronics of the ultrasonic anemometer is …
The Rain Bird Anemometer provides additional customization to the Maxicom Central Control system by providing sitespecific windspeed measurements. Local wind speed is captured by the Wind Speed Meter and input to the Cluster Control Unit (CCU).
Perfect for use in HVAC, environmental studies, hazardous spill clean ups, electrostatic precipitators, and all types of air flow measurements. Based on the principle that a freely turning turbine will rotate at a speed directly proportional to the wind speed. One piece construction with built-in probe. Select readout in any of 5 scales: meters/second (0.4 …
Depending on the type of application, the anemometer is made as a hot wire anemometer or a pocket weather anemometer, both of which can measure air velocity and air pressure. The results of measuring the air velocity can be stored in memory, Category of anemometersdepending on the model. There are a lot of anemometers available.
The new VA520 Series flowmeter operates using the well proven colorimetric measuring principle. This technology uses a heated sensor which is cooled by the gas flow as it passes and the degree of cooling is dependent upon the mass flow rate of the flow medium.
Preferred worldwide for fiscal measurement, the next-generation Daniel™ SeniorSonic™ 3414 Four-Path Ultrasonic Flow Meter retains the field-proven, British Gas-chordal design while significantly increasing sampling speed with ultra-fast Daniel 3410 Series Electronics.
Each factory needs compressed air, however, often it is not realized that compressed air is one of the most expensive types of energy. Therefore, the intelligent use of flow measurement DS 400, holds an enormous potential for saving energy.
EXAIR’s Digital Flowmeter is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used downstream.
Impact RM’s LP Meter – this mechanical flow meter is designed for testing compressor performance, measuring air leakage in the plant air system and can be used to quantify plant air consumption.